4 ft 8+1⁄2 in)
| Leading dia. | 914.5 mm (3 ft 0 in) |
|---|
| Driver dia. | 1,524 mm (5 ft 0 in) |
|---|
| Trailing dia. | 914.5 mm (3 ft 0 in) |
|---|
| Wheelbase: | |
|---|
• Axle spacing
(Asymmetrical) | - 2,006 mm (6 ft 7 in) +
- 1,384 mm (4 ft 6+1⁄2 in)
|
|---|
| • Engine | 3,390 mm (11 ft 1+1⁄2 in) |
|---|
| • Tender | 1,780 mm (5 ft 10+1⁄8 in) |
|---|
| • incl. tender | 6,825 mm (22 ft 4+3⁄4 in) |
|---|
Length:
| |
|---|
| • Over buffers | 9,798 mm (32 ft 1+3⁄4 in) |
|---|
| Adhesive weight | 6.83 t (6.72 long tons; 7.53 short tons) |
|---|
| Service weight | 17.14 t (16.87 long tons; 18.89 short tons) |
|---|
| Tender type | 2 T 3,35 |
|---|
| Fuel capacity | 600 kg (1,300 lb) |
|---|
| Water cap. | 3.35 m3 (740 imp gal; 880 US gal) |
|---|
| Firebox: | |
|---|
| • Grate area | 0.76 m2 (8.2 sq ft) |
|---|
Boiler:
| |
|---|
| • Tube plates | 2,895 mm (9 ft 6 in) |
|---|
| • Small tubes | 46 mm (1+13⁄16 in), 111 off |
|---|
| Boiler pressure | 6.0 bar (6.12 kgf/cm2; 87.0 lbf/in2) |
|---|
| Heating surface: | |
|---|
| • Firebox | 4.83 m2 (52.0 sq ft) |
|---|
| • Tubes | 41.62 m2 (448.0 sq ft) |
|---|
| • Total surface | 46.45 m2 (500.0 sq ft) |
|---|
| Cylinders | Two, outside |
|---|
| Cylinder size | 305 mm × 508 mm (12 in × 20 in) |
|---|
| Performance figures |
|---|
| Maximum speed | 40 km/h (25 mph) |
|---|
| Indicated power | 130 PS (96 kW; 130 hp) |
|---|
|
|
Bavarian A I engines were German steam locomotives in service with the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn) from 1841 to 1871.
Three manufacturers were awarded a contract to build eight locomotives each, with the stipulation that the components of the different machines had to be interchangeable with one another. The engines achieved a speed of 33 km/h on a line with an incline of 1:200. The first engine was retired in 1871 and scrapped. Five examples were rebuilt into B I class 2-4-0 locomotives, four were rebuilt into C I class 0-6-0 locomotives, and four were sold. The last one was scrapped in 1874.
They were coupled with 2 T 3,35 tenders.
Der Münchner
| Der Münchner |
|---|
 |
| Type and origin |
|---|
| Power type | Steam |
|---|
| Builder | Maffei |
|---|
| Serial number | 1 |
|---|
| Build date | 1841 |
|---|
| Total produced | 1 |
|---|
|
| Specifications |
|---|
Configuration:
| |
|---|
| • Whyte | 2-2-2 |
|---|
| Gauge | 1,435 mm (4 ft 8+1⁄2 in) |
|---|
| Leading dia. | 915 mm (3 ft 0 in) |
|---|
| Driver dia. | 1,524 mm (5 ft 0 in) |
|---|
| Trailing dia. | 915 mm (3 ft 0 in) |
|---|
Length:
| |
|---|
| • Over buffers | 9,739 mm (31 ft 11+7⁄16 in) |
|---|
| Adhesive weight | 6.8 t (6.7 long tons; 7.5 short tons) |
|---|
| Service weight | 13.8 t (13.6 long tons; 15.2 short tons) |
|---|
| Water cap. | 3.0 m3 (660 imp gal; 790 US gal) |
|---|
| Firebox: | |
|---|
| • Grate area | 0.93 m2 (10.0 sq ft) |
|---|
| Boiler pressure | 6 kgf/cm2 (588 kPa; 85.3 lbf/in2) |
|---|
| Heating surface | 46.00 m2 (495.1 sq ft) |
|---|
| Cylinders | Two |
|---|
| Cylinder size | 305 mm × 457 mm (12 in × 18 in) |
|---|
|
| Performance figures |
|---|
| Maximum speed | 59 km/h (37 mph) |
|---|
| Indicated power | 100 PS (74 kW; 99 hp) |
|---|
|
| Career |
|---|
| Operators | |
|---|
| Numbers | K.Bay.Sts.E.: 25 |
|---|
| Retired | 1871 |
|---|
|
Der Münchner (a Münchner is a man from Munich) was a Bavarian Class A I engine with the number 25. It was originally built for the Munich–Augsburg Railway Company, a private railway company which ran the route between Munich and Augsburg. In 1844 the line was taken over by the state railway and the engine was transferred into state ownership. A large part of the locomotive came from England, which can be seen from the typically English 'pear' shape of the outer firebox.
It was coupled with a 2 T 3 tender.
See also
References
- Schnabel, Heinz (1987). Eisenbahn-Fahrzeug-Archiv Band 2.5: Lokomotiven bayerischer Eisenbahnen (in German). Düsseldorf: Alba Publikation Alf Teloeken GmbH + Co KG. pp. 56–59, 368. ISBN 3-87094-105-7.
