Midland-Ross
- Aerospace
- brakes
- electronics
- steel
- synthetic fibers
- Parish & Bingham
- Detroit Pressed Steel Co.
- Parish Manufacturing Co.
- Ross Engineering
- Steel City
- Surface Combustion
- R.P.C.
- Nelson Metal Products
- Midrex
- Waldron-Hartig
- Capitol Foundry
- Janitrol Aero
- Midland Frame
- National Castings
- Industrial Castings
- Unicast
- Power Controls
Midland-Ross Co. was an American steel, aerospace products, electronics, and automobile components manufacturer which existed from 1894 to 1986.
Founded as Parish & Bingham, a manufacturer of steel components for bicycles, streetcars, and horse-drawn wagons, it merged with the Detroit Pressed Steel Co. in 1923 to form the Midland Steel Products Co. It then merged with the J. O. Ross Engineering Co. in 1957 to form Midland-Ross. A major downturn in the automobile industry in the early 1980s led the company to spin off most of its divisions, leaving it with just aerospace, electronics, small metal castings, and thermal processes. It was purchased and dismantled by Forstmann Little & Company in 1986.[citation needed]
Predecessor companies
Parish & Bingham was a manufacturer of small steel items such as metal dies, metal type, rings, and watch cases founded in September 1894 in Cleveland, Ohio. The company began producing currycombs in 1900, and bicycle and automobile frames in 1904. Automobile frames became the company's chief business by 1907. The company was incorporated and became a publicly traded corporation on December 29, 1911. It was reorganized under the laws of New York on July 31, 1919.[2]
In 1909, the Detroit Pressed Steel Company was formed in Detroit, Michigan. It manufactured automobile and truck frames, as well as stamped steel products.[3]
Midland Steel Products
On March 21, 1923, Parish & Bingham and the Detroit Pressed Steel Co. merged to form a new company, Midland Steel Products.[4] The merger was complete in mid-May 1923,[5] making Midland Steel Products the largest automobile frame manufacturer in the United States.[6] In 1927, the company invented the first four-wheel brake, and began to manufacture automobile and truck brakes.[7]
By 1954, Midland Steel Products had annual sales of $54.64 million ($619,930,409 in 2023 dollars), making it the 12th largest company with headquarters in Cleveland and the 458th largest company in the entire United States.[8] Three years later, it had annual sales of $72 million ($781,080,569 in 2023 dollars), and it ranked as the 428th largest company in the entire United States.[9]
On October 16, 1957, Midland Steel Products announced it was merging with the J. O. Ross Engineering Corporation, a designer and manufacturer of atmospheric control plants for factories; finishing and painting apparatus; coating and printing equipment for paper, sheet plastic, and tires; and a wide array of couplings, joints, valves, and similar fittings. Ross Engineering had sales of about $28 million in 1956.[10] The merger was approved by Midland stockholders on November 26, and the new company took the name Midland-Ross Corporation.[11] Ross Engineering brought several subsidiaries to the deal, including the John Waldron Corp.,[11] which manufactured paper processing machinery.[12]
Midland-Ross
Midland-Ross embarked on a wide-ranging and rapid expansion in its business in the late 1950s and the 1960s.
Late 1950s expansion and contraction
By the end of 1957, Midland-Ross owned 11 manufacturing plants, in which it made automobile frames, brakes, miscellaneous automotive products, and atmospheric control devices for factories. It ended the year with $100 million ($1,084,834,123 in 2023 dollars) in sales. In March 1958, the company purchased the Hartig Engine & Machine Co. of Mountainside, New Jersey, for $1.2 million ($12,672,664 in 2023 dollars). The firm designed and manufactured thermoplastic extruding machinery.[13] Eight months later, Midland-Ross acquired the Transportation Equipment Division of Consolidated Metal Products Co.[14] The company made door controls and air- and pneumatic-powered doors for buses, railroad passenger cars, and subway cars.[15]
The automobile frame manufacturing business of Midland-Ross suffered significant setbacks. The company closed its plant in Detroit in 1959 after automaker Chrysler declined to renew a contract with the company to make frames for its Dodge and De Soto brands. About 1,400 employees were laid off.[12] Chrysler than canceled its contract with Midland-Ross to provide frames for its Chrysler cars and trucks. This forced Midland-Ross to close its Chicago, Illinois, plant a few months later and lay off 2,500 employees.[16]
In April 1959, Midland-Ross acquired Nelson Metal Products of Grand Rapids, Michigan, maker of zinc and aluminium die castings.[17] In November 1959, Midland-Ross Corporation bought Surface Combustion for $23 million.[18] The company, maker of industrial furnaces and heat treating equipment, was headquartered in Maumee, Ohio.[19] Sale of the company included its Janitrol and Janitrol Aero divisions, which made heating and cooling products for consumer use and aircraft and missiles, respectively.[15]
Early 1960s expansion
By 1961, Midland-Ross had 14 plants and about 6,000 employees. In February, it acquired the Industrial Rayon Corporation for $41 million ($418,035,635 in 2023 dollars). The company manufactured Tyrex, a rayon fiber used in automobile tires, and rayon fibers for use in industrial manufacturing and clothing.[15][20] Midland-Ross purchased the Fandaire division of Yuba Consolidated Industries in February 1962 and merged the company (which made air-cooled condensers and cooling products) with Surface Combustion.[15][19]
These acquisitions and mergers significantly changed Midland-Ross. In 1956, the company had annual sales of about $72 million and earnings of $2.8 million ($27,071,595 in 2023 dollars). The company then spent roughly $34 million acquiring other companies. By the end of 1961, Midland-Ross had annual sales of $137.6 million ($1,330,375,502 in 2023 dollars), and $5.4 million ($52,209,504 in 2023 dollars) in annual earnings. While nearly 100 percent of its sales came from the manufacture of automobile frames in 1956, this had changed significantly by 1961, with 33 percent of sales from consumer durables, 32 percent from capital goods, 30 percent from automotive products, and 5 percent from aircraft and missile components.[15]
Acquisitions continued. In January 1963, Midland-Ross acquired the J. Leukart Machine Company of Columbus, Ohio, manufacturer of precision machining equipment. In April, it acquired the Steel City Electric Co. of Pittsburgh, Pennsylvania, a manufacturer of electrical cables, junction boxes, and other industrial electrical equipment.[21] That same year, it changed the name of its Midland Brake division to Power Controls. The company had significantly diversified its product line, and now primarily manufactured air and vacuum brake systems, air compressors, brake valves, treadles, and slack adjustors.[22] By 1965, Midland-Ross' sales had risen to a record $210 million ($2,278,151,659 in 2023 dollars). In February of that year, it acquired National Malleable and Steel Castings Co. (a company which made grinding balls, iron and steel castings, and railway equipment) for $30 million ($290,052,798 in 2023 dollars).[23] The purchase included two subsidiaries, Industrial Castings (an iron and steel casting manufacturer) and Capitol Foundry (maker of steel grinding balls for the mining industry).[24]
Late 1960s acquisitions
Midland-Ross continued to make significant acquisitions throughout the late 1960s, as well as consolidated a number of its divisions.
By 1966, Midland-Ross had sales of $344 million ($3,230,424,615 in 2023 dollars) and earnings of $17.6 million ($165,277,538 in 2023 dollars). In August 1967, it purchased Unicast, a maker of specialty steel castings, for $9.6 million ($87,722,156 in 2023 dollars).[25] The following November, it acquired the Reinforced Plastic Container Corp. of Roxboro, North Carolina. The company made commercial waste management disposal systems, container handling systems, liquid separators, and plastic containers.[26]
In March 1968, Midland-Ross began to consolidate some of its acquisitions into new, larger divisions. It merged Nelson Metal Products and Grand Rapids Bright Metal Co. (a manufacturer of bright chrome electroplating and other finishes) into a new division, named Nelson Metal Products.[27] The company also began to divest some of its assets. In April 1969, Midland-Ross sold Surface Combustion's Janitrol and Webster divisions to Laird, Inc. The sale did not include the Janitrol Aero division, which was retained by Surface Combustion.[28]
In June 1969, Midland-Ross formed a new division, Midrex, and constructed a plant for the new division in South Carolina. Midrex used a patented natural gas process to manufacture high-iron content metal pellets for use as ore by the iron and steel smelting industries.[29]
Consolidation in the 1970s
One of Midland-Ross' last acquisitions came in February 1970, when it gained control of Cameron Machine, a company that made winders, sheeters, and slitters for the paper, plastic, textile, metal, and rubber industries.[30]
Throughout the 1970s, Midland-Ross made a series of consolidations among its divisions and divested itself of assets. It consolidated Ross Engineering, Waldron-Hartig, and Cameron Machine into a new Machinery Division in February 1971;[31] sold Midrex to a West German steel manufacturer, Korf Stahl A.G., in January 1974 for $25 million ($154,453,441 in 2023 dollars);[32] merged Industrial Castings and Unicast into a new division called National Castings in July 1975;[33] spun off Capitol Foundry into a new division called Capitol Castings in July 1975;[34] sold Reinforced Plastic Container to the Youngstown Steel Door Company for $2 million ($11,324,675 in 2023 dollars) in December 1975;[35] and merged Nelson Metal and Grand Rapids Bright Metal into Power Controls in December 1977.
The new division focused on the manufacture of air horns, air reservoirs, control valves, bus door operating systems, load levelers, and aluminum and zinc ornamental and functional die castings like taillight trim, hood ornaments, and name plates.[36] Power Controls was renamed Midland Brake in 1980.[37]
1980s divestitures and dissolution
By 1981, Midland-Ross had 19 separate divisions, and operated 57 plants in the United States as well as nine other countries. Its annual sales were over $900 million ($3,016,251,830 in 2023 dollars).[38]
During the early 1980s recession in the United States, Midland-Ross suffered significant financial losses as the automotive industry went into decline and orders shrank significantly. The company now began to shed many of its assets. Midland-Ross sold Midland Brake in September 1982 to Echlin, Inc., a brake manufacturer based in Branford, Connecticut. [39] It sold what was left of its steelmaking operations to the specialty steel firm of Lamson and Sessions in 1984.[40] It spun off its National Castings division for $35 million ($99,152,228 in 2023 dollars) into a new company known as National Castings Inc. in April 1985.[41] It then sold Nelson Metal Products to Humphrey Management Corp. for an undisclosed sum the same year.[42]
Dissolution
The Midland-Ross Corporation was acquired by Forstmann Little & Company, a private equity investment firm, on July 1, 1986, for $450 million ($1,250,819,672 in 2023 dollars).[43] Midland-Ross ceased to exist, and many of its divisions were spun off as stand-alone companies or sold to other firms over the next two decades.[a]
References
- Notes
- ^ For example, Forstmann, Little sold Surface Combustion to a management group in 1987, making the company independent again.[44] The sale did not include Surface Combustion's Janitrol Aero division, which Forstmann, Little retained as part of its FL Aerospace Corporation.[45] The Steel City division was merged with Fortmann, Little's American Electric. Forstmann, Little sold American Electric to the Thomas & Betts Corporation in 1991 for $432.5 million.[46]
- Citations
- ^ "Season's Greetings for the New Year". The Owosso Argus-Press. December 30, 1972. p. 5. Retrieved April 25, 2016.
- ^ "Reports and Documents". Commercial and Financial Chronicle. December 6, 1919. p. 2179.
- ^ Moody's Analyses of Investments and Securities Ratings Books 1922, p. 1513.
- ^ Moody's Manual of Railroads and Corporation Securities 1924, p. 908.
- ^ "Midland Steel Products Starts". The Plain Dealer. May 13, 1923. p. D7.
- ^ Rockwell, Guy T. (April 25, 1923). "Big Frame Plants to Enter Merger". The Plain Dealer. p. 12.
- ^ "Many Advances Anticipated in Design of Cars". The Plain Dealer. October 30, 1927. p. 45.
- ^ Bryan, John E. (July 3, 1955). "Top Firms Have Operations Here". The Plain Dealer. p. C11.
- ^ Bryan, John E. (June 25, 1957). "Sunny Outlook for Rubber is Forecast". The Plain Dealer. p. A25.
- ^ Bryan, John E. (October 17, 1957). "Midland Steel Plans J. O. Ross Merger". The Plain Dealer. p. A19.
- ^ a b "Stockholders of Midland Steel OK Merger Plan". The Plain Dealer. November 27, 1957. p. A22.
- ^ a b "Company Sights Detroit Closing". The Plain Dealer. March 7, 1959. p. 21.
- ^ Bryan, John E. (March 7, 1958). "Midland-Ross Corp. Buys Hartig Engine". The Plain Dealer. p. A27.
- ^ "More Planned Growth by Midland". The Plain Dealer. November 3, 1958. p. A41.
- ^ a b c d e Bryan, John E. (June 6, 1962). "Diversity Pays Off at Midland-Ross". The Plain Dealer. p. A21.
- ^ "2,500 Are Laid Off At Midland-Ross". Toledo Blade. July 26, 1959. p. 22. Retrieved April 25, 2016.
- ^ "Midland-Ross Continues Growth, Buys Two Companies". The Owosso Argus-Press. December 31, 1959. p. 12. Retrieved April 25, 2016.
- ^ Bryan, John E. (November 10, 1959). "Midland-Ross Buys Surface Combustion". The Plain Dealer. p. L33.
- ^ a b "Other Sales, Mergers". The New York Times. February 22, 1962. p. 35.
- ^ Bryan, John E. (February 22, 1961). "Boards OK Merger of Midland, Rayon". The Plain Dealer. pp. A1, A18.
- ^ Bryan, John E. (March 5, 1964). "Midland Profits Rise 29% in 1963". The Plain Dealer. p. A24.
- ^ Harrelson & Harsh 1986, p. 86.
- ^ Bryan, John E. (February 4, 1965). "Midland-National Merger Wins OK". The Plain Dealer. p. A14.
- ^ Gillette, A.V. (July 9, 1967). "Auto Style Change Brought Midland-Ross to Arizona". Arizona Republic. p. 26. Retrieved April 25, 2016.
- ^ "Midland, Unicast Agree to Merge". The Plain Dealer. August 8, 1967. p. A22.
- ^ "Midland-Ross Buys Plastic Firm". The Plain Dealer. November 1, 1967. p. A18.
- ^ "Midland-Ross Forms New Unit". The Plain Dealer. March 21, 1968. p. A36.
- ^ Abele, John J. (April 11, 1969). "U.S. Freight Sets Share Acquisition". The New York Times. pp. 63, 67.
- ^ "Midland-Ross Has New Division". The Plain Dealer. June 26, 1969. p. A31.
- ^ "Midland Acquires Cameron Machine". The Plain Dealer. February 1, 1970. p. A40.
- ^ "3 Midland-Ross Units Consolidated". The Plain Dealer. February 10, 1971. p. A27.
- ^ "Bonn Firm Buys Some M-R Assets". The Plain Dealer. January 5, 1974. p. A36.
- ^ "Divisions Merged By Midland-Ross". The Plain Dealer. July 11, 1975. p. A46.
- ^ "Cleveland Notebook". The Plain Dealer. July 18, 1975. p. A52.
- ^ "Youngstown Steel Door Buys Midland-Ross Unit". The Plain Dealer. December 18, 1975. p. B3.
- ^ "Midland-Ross Sees Significant Changes". The Owosso Argus-Press. December 31, 1977. p. A9. Retrieved April 25, 2016.
- ^ "Midland-Ross Power Controls Changed to Midland Brake". The Owosso Argus-Press. July 1, 1980. p. 16. Retrieved April 26, 2016.
- ^ "Midland-Ross Co". The Encyclopedia of Cleveland History. July 21, 1997. Retrieved April 25, 2016.
- ^ "Midland Brake Equipment Sold, Future Uncertain". The Owosso Argus-Press. September 1, 1982. p. 1. Retrieved April 26, 2016.
- ^ Gleisser, Marcus (July 2, 1986). "Firm Began Here in 1908". The Plain Dealer. p. E2.
- ^ "Midland-Ross". Reuters. July 3, 1985. Retrieved April 25, 2016.
- ^ Tonkin, Lea A.P. (March–April 1993). "Creating and Sustaining Supportive Employee Communications" (PDF). Target: 9. Retrieved April 25, 2016.
- ^ Sims, Calvin (July 2, 1986). "Forstmann in Deal for Midland-Ross". The New York Times. Retrieved April 25, 2016.
- ^ Ward's Business Directory 1995, p. 4184.
- ^ "Companhy News: Forstmann Little". The New York Times. March 10, 1988.
- ^ "Company News: American Electric". The New York Times. November 15, 1991. Retrieved April 26, 2016.
Bibliography
- Harrelson, Helen; Harsh, Richard W. (1986). 150 Years of Owosso Highlights, 1836-1986. Owosso, Mich.: Richard Harsh & Associates.
- Moody's Analyses of Investments and Securities Ratings Books. New York: Moody Manual Co. 1922.
- Moody's Manual of Railroads and Corporation Securities. Volume 2: K-Z. New York: Moody Manual Co. 1924.
- Ward's Business Directory of U.S. Private and Public Companies. New York: Gale Research Inc. 1995. ISBN 9780810388284.