Riemann sum
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/56/Riemann_sum_convergence.svg/300px-Riemann_sum_convergence.svg.png)
In mathematics, a Riemann sum is a certain kind of approximation of an integral by a finite sum. It is named after nineteenth century German mathematician Bernhard Riemann. One very common application is in numerical integration, i.e., approximating the area of functions or lines on a graph, where it is also known as the rectangle rule. It can also be applied for approximating the length of curves and other approximations.
The sum is calculated by partitioning the region into shapes (rectangles, trapezoids, parabolas, or cubics — sometimes infinitesimally small) that together form a region that is similar to the region being measured, then calculating the area for each of these shapes, and finally adding all of these small areas together. This approach can be used to find a numerical approximation for a definite integral even if the fundamental theorem of calculus does not make it easy to find a closed-form solution.
Because the region by the small shapes is usually not exactly the same shape as the region being measured, the Riemann sum will differ from the area being measured. This error can be reduced by dividing up the region more finely, using smaller and smaller shapes. As the shapes get smaller and smaller, the sum approaches the Riemann integral.
Definition
Let be a function defined on a closed interval of the real numbers, , and as a partition of , that is A Riemann sum of over with partition is defined as where and .[1] One might produce different Riemann sums depending on which 's are chosen. In the end this will not matter, if the function is Riemann integrable, when the difference or width of the summands approaches zero.
Types of Riemann sums
Specific choices of give different types of Riemann sums:
- If for all i, the method is the left rule[2][3] and gives a left Riemann sum.
- If for all i, the method is the right rule[2][3] and gives a right Riemann sum.
- If for all i, the method is the midpoint rule[2][3] and gives a middle Riemann sum.
- If (that is, the supremum of over ), the method is the upper rule and gives an upper Riemann sum or upper Darboux sum.
- If (that is, the infimum of f over ), the method is the lower rule and gives a lower Riemann sum or lower Darboux sum.
All these Riemann summation methods are among the most basic ways to accomplish numerical integration. Loosely speaking, a function is Riemann integrable if all Riemann sums converge as the partition "gets finer and finer".
While not derived as a Riemann sum, taking the average of the left and right Riemann sums is the trapezoidal rule and gives a trapezoidal sum. It is one of the simplest of a very general way of approximating integrals using weighted averages. This is followed in complexity by Simpson's rule and Newton–Cotes formulas.
Any Riemann sum on a given partition (that is, for any choice of between and ) is contained between the lower and upper Darboux sums. This forms the basis of the Darboux integral, which is ultimately equivalent to the Riemann integral.
Riemann summation methods
The four Riemann summation methods are usually best approached with subintervals of equal size. The interval [a, b] is therefore divided into subintervals, each of length
The points in the partition will then be
Left rule
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c9/LeftRiemann2.svg/220px-LeftRiemann2.svg.png)
For the left rule, the function is approximated by its values at the left endpoints of the subintervals. This gives multiple rectangles with base Δx and height f(a + iΔx). Doing this for i = 0, 1, ..., n − 1, and summing the resulting areas gives
The left Riemann sum amounts to an overestimation if f is monotonically decreasing on this interval, and an underestimation if it is monotonically increasing. The error of this formula will be where is the maximum value of the absolute value of over the interval.
Right rule
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/45/RightRiemann2.svg/220px-RightRiemann2.svg.png)
For the right rule, the function is approximated by its values at the right endpoints of the subintervals. This gives multiple rectangles with base Δx and height f(a + iΔx). Doing this for i = 1, ..., n, and summing the resulting areas gives
The right Riemann sum amounts to an underestimation if f is monotonically decreasing, and an overestimation if it is monotonically increasing. The error of this formula will be where is the maximum value of the absolute value of over the interval.
Midpoint rule
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d2/MidRiemann2.svg/220px-MidRiemann2.svg.png)
For the midpoint rule, the function is approximated by its values at the midpoints of the subintervals. This gives f(a + Δx/2) for the first subinterval, f(a + 3Δx/2) for the next one, and so on until f(b − Δx/2). Summing the resulting areas gives
The error of this formula will be where is the maximum value of the absolute value of over the interval. This error is half of that of the trapezoidal sum; as such the middle Riemann sum is the most accurate approach to the Riemann sum.
Generalized midpoint rule
A generalized midpoint rule formula, also known as the enhanced midpoint integration, is given by where denotes even derivative.
For a function defined over interval , its integral is Therefore, we can apply this generalized midpoint integration formula by assuming that . This formula is particularly efficient for the numerical integration when the integrand is a highly oscillating function.
Trapezoidal rule
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/76/TrapRiemann2.svg/220px-TrapRiemann2.svg.png)
For the trapezoidal rule, the function is approximated by the average of its values at the left and right endpoints of the subintervals. Using the area formula for a trapezium with parallel sides b1 and b2, and height h, and summing the resulting areas gives
The error of this formula will be where is the maximum value of the absolute value of .
The approximation obtained with the trapezoidal sum for a function is the same as the average of the left hand and right hand sums of that function.
Connection with integration
For a one-dimensional Riemann sum over domain , as the maximum size of a subinterval shrinks to zero (that is the limit of the norm of the subintervals goes to zero), some functions will have all Riemann sums converge to the same value. This limiting value, if it exists, is defined as the definite Riemann integral of the function over the domain,
For a finite-sized domain, if the maximum size of a subinterval shrinks to zero, this implies the number of subinterval goes to infinity. For finite partitions, Riemann sums are always approximations to the limiting value and this approximation gets better as the partition gets finer. The following animations help demonstrate how increasing the number of subintervals (while lowering the maximum subinterval size) better approximates the "area" under the curve:
- Left Riemann sum
- Right Riemann sum
- Middle Riemann sum
Since the red function here is assumed to be a smooth function, all three Riemann sums will converge to the same value as the number of subintervals goes to infinity.
Example
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b9/Area-under-curve-for-x-squared.svg/220px-Area-under-curve-for-x-squared.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0f/Riemann_sum_%28y%3Dx%5E2%29.gif/220px-Riemann_sum_%28y%3Dx%5E2%29.gif)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8b/Riemann_sum_error.svg/220px-Riemann_sum_error.svg.png)
Taking an example, the area under the curve y = x2 over [0, 2] can be procedurally computed using Riemann's method.
The interval [0, 2] is firstly divided into n subintervals, each of which is given a width of ; these are the widths of the Riemann rectangles (hereafter "boxes"). Because the right Riemann sum is to be used, the sequence of x coordinates for the boxes will be . Therefore, the sequence of the heights of the boxes will be . It is an important fact that , and .
The area of each box will be and therefore the nth right Riemann sum will be:
If the limit is viewed as n → ∞, it can be concluded that the approximation approaches the actual value of the area under the curve as the number of boxes increases. Hence:
This method agrees with the definite integral as calculated in more mechanical ways:
Because the function is continuous and monotonically increasing over the interval, a right Riemann sum overestimates the integral by the largest amount (while a left Riemann sum would underestimate the integral by the largest amount). This fact, which is intuitively clear from the diagrams, shows how the nature of the function determines how accurate the integral is estimated. While simple, right and left Riemann sums are often less accurate than more advanced techniques of estimating an integral such as the Trapezoidal rule or Simpson's rule.
The example function has an easy-to-find anti-derivative so estimating the integral by Riemann sums is mostly an academic exercise; however it must be remembered that not all functions have anti-derivatives so estimating their integrals by summation is practically important.
Higher dimensions
The basic idea behind a Riemann sum is to "break-up" the domain via a partition into pieces, multiply the "size" of each piece by some value the function takes on that piece, and sum all these products. This can be generalized to allow Riemann sums for functions over domains of more than one dimension.
While intuitively, the process of partitioning the domain is easy to grasp, the technical details of how the domain may be partitioned get much more complicated than the one dimensional case and involves aspects of the geometrical shape of the domain.[4]
Two dimensions
In two dimensions, the domain may be divided into a number of two-dimensional cells such that . Each cell then can be interpreted as having an "area" denoted by .[5] The two-dimensional Riemann sum is where .
Three dimensions
In three dimensions, the domain is partitioned into a number of three-dimensional cells such that . Each cell then can be interpreted as having a "volume" denoted by . The three-dimensional Riemann sum is[6] where .
Arbitrary number of dimensions
Higher dimensional Riemann sums follow a similar pattern. An n-dimensional Riemann sum is where , that is, it is a point in the n-dimensional cell with n-dimensional volume .
Generalization
In high generality, Riemann sums can be written where stands for any arbitrary point contained in the set and is a measure on the underlying set. Roughly speaking, a measure is a function that gives a "size" of a set, in this case the size of the set ; in one dimension this can often be interpreted as a length, in two dimensions as an area, in three dimensions as a volume, and so on.
See also
- Antiderivative
- Euler method and midpoint method, related methods for solving differential equations
- Lebesgue integration
- Riemann integral, limit of Riemann sums as the partition becomes infinitely fine
- Simpson's rule, a powerful numerical method more powerful than basic Riemann sums or even the Trapezoidal rule
- Trapezoidal rule, numerical method based on the average of the left and right Riemann sum
References
- ^ Hughes-Hallett, Deborah; McCullum, William G.; et al. (2005). Calculus (4th ed.). Wiley. p. 252. (Among many equivalent variations on the definition, this reference closely resembles the one given here.)
- ^ a b c Hughes-Hallett, Deborah; McCullum, William G.; et al. (2005). Calculus (4th ed.). Wiley. p. 340.
So far, we have three ways of estimating an integral using a Riemann sum: 1. The left rule uses the left endpoint of each subinterval. 2. The right rule uses the right endpoint of each subinterval. 3. The midpoint rule uses the midpoint of each subinterval.
- ^ a b c Ostebee, Arnold; Zorn, Paul (2002). Calculus from Graphical, Numerical, and Symbolic Points of View (Second ed.). p. M-33.
Left-rule, right-rule, and midpoint-rule approximating sums all fit this definition.
- ^ Swokowski, Earl W. (1979). Calculus with Analytic Geometry (Second ed.). Boston, MA: Prindle, Weber & Schmidt. pp. 821–822. ISBN 0-87150-268-2.
- ^ Ostebee, Arnold; Zorn, Paul (2002). Calculus from Graphical, Numerical, and Symbolic Points of View (Second ed.). p. M-34.
We chop the plane region R into m smaller regions R1, R2, R3, ..., Rm, perhaps of different sizes and shapes. The 'size' of a subregion Ri is now taken to be its area, denoted by ΔAi.
- ^ Swokowski, Earl W. (1979). Calculus with Analytic Geometry (Second ed.). Boston, MA: Prindle, Weber & Schmidt. pp. 857–858. ISBN 0-87150-268-2.
External links
- Weisstein, Eric W. "Riemann Sum". MathWorld.
- A simulation showing the convergence of Riemann sums
- v
- t
- e
- Cauchy–Riemann equations
- Generalized Riemann hypothesis
- Grand Riemann hypothesis
- Grothendieck–Hirzebruch–Riemann–Roch theorem
- Hirzebruch–Riemann–Roch theorem
- Local zeta function
- Measurable Riemann mapping theorem
- Riemann (crater)
- Riemann Xi function
- Riemann curvature tensor
- Riemann hypothesis
- Riemann integral
- Riemann invariant
- Riemann mapping theorem
- Riemann form
- Riemann problem
- Riemann series theorem
- Riemann solver
- Riemann sphere
- Riemann sum
- Riemann surface
- Riemann zeta function
- Riemann's differential equation
- Riemann's minimal surface
- Riemannian circle
- Riemannian connection on a surface
- Riemannian geometry
- Riemann–Hilbert correspondence
- Riemann–Hilbert problems
- Riemann–Lebesgue lemma
- Riemann–Liouville integral
- Riemann–Roch theorem
- Riemann–Roch theorem for smooth manifolds
- Riemann–Siegel formula
- Riemann–Siegel theta function
- Riemann–Silberstein vector
- Riemann–Stieltjes integral
- Riemann–von Mangoldt formula
Category