CGR 1st Class 2-6-0ST

11 ft 3+12 in (3,442 mm) • Coupled7 ft 9 in (2,362 mm)Length:
​ • Over couplers22 ft 9+12 in (6,947 mm)Height11 ft 4+12 in (3,467 mm)Axle load 7 LT 8 cwt (7,519 kg) ​ • Leading 5 LT 6 cwt (5,385 kg) • 1st coupled 6 LT 16 cwt (6,909 kg) • 2nd coupled 7 LT 8 cwt (7,519 kg) • 3rd coupled 6 LT 3 cwt (6,249 kg)Adhesive weight 20 LT 7 cwt (20,680 kg)Loco weight 25 LT 13 cwt (26,060 kg)Fuel typeCoalFuel capacity 10 long hundredweight (0.5 t)Water cap. 520 imp gal (2,360 L)Firebox:​ • TypeRound-top • Grate area10 sq ft (0.93 m2)Boiler:
​ • Pitch5 ft 8 in (1,727 mm)Boiler pressure140 psi (965 kPa)Safety valveSalterHeating surface:​ • Firebox49 sq ft (4.6 m2) • Tubes483 sq ft (44.9 m2) • Total surface532 sq ft (49.4 m2)CylindersTwoCylinder size12 in (305 mm) bore
20 in (508 mm) strokeValve gearStephensonValve typeSlideCouplersJohnston link-and-pin
Performance figures
Tractive effort7,754 lbf (34.49 kN) @ 75%
Career
OperatorsCape Government Railways
South African Railways
ClassCGR 1st Class, SAR Class 01
Number in class2
NumbersM15-M16, SAR 0415-0416
Delivered1876
First run1876
Withdrawn1946

The Cape Government Railways 1st Class 2-6-0ST of 1876 was a South African steam locomotive from the pre-Union era in the Cape of Good Hope.

In 1876, the Cape Government Railways placed a pair of Stephenson's Patent back-to-back 2-6-0 Mogul type side-tank locomotives, built by Kitson, in service on the Cape Midland system. They were later separated and rebuilt to saddle-tank locomotives for use as shunting engines. When a classification system was introduced by the Railways, they were designated 1st Class.[1][2]

Manufacturer

A pair of Stephenson's Patent back-to-back Mogul type 2-6-0 side-tank locomotives were delivered to the Cape Government Railways (CGR) from Kitson and Company in 1876. They arrived in Port Elizabeth on the ship Queen of the West on 21 February and were numbered M15 and M16 in the Midland System's number range.[1][2][3]

Characteristics

The locomotives were built as permanently coupled back-to-back tank locomotives, a configuration which allowed the two engines to be operated by a single crew. A similar pair of 0-6-0T back-to-back locomotives, built by Robert Stephenson and Company, was delivered to the Eastern System in East London in that same year.[3][4]

Their feedwater pumps, attached to the right hand side of their spectacle plates, were actuated from the piston crossheads. The locomotives were also each equipped with a small feedwater injector feed, attached to the left side of the smokebox, for use in cases of emergency or while the locomotives were stationary. The injector had been invented by the French engineer Henri Giffard in 1852.[5]

Tyre wear was reduced by supplying jets of water, fed from 12 inch (13 millimetres) diameter pipes, to the leading wheels while negotiating curves. This was found to diminish friction significantly.[5]

Their cylinders and slide valve faces were lubricated by tallow cups, attached to the sides of the cylinder assemblies. When melted tallow was later found to be unsatisfactory, it was replaced by vegetable oils.[5]

Service

Cape Government Railways

It is not known whether this back-to-back pair displayed the same instability in operation as the 0-6-0T back-to-back locomotive pair on the Eastern System, but by 1881 they had also been separated. In the process they were rebuilt to saddle-tank engines for use in shunting service in Port Elizabeth, where both spent the rest of their service lives. When a classification system was introduced on the CGR, they were designated 1st Class.[1][2][3][6][7]

During the CGR era, both locomotives were renumbered more than once. By 1886, the system prefix "M" was replaced by the numeral "1". They were renumbered at least twice more, to 215 and 216 by 1890 and to 415 and 416 by 1896.[1][2][7]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways was only implemented with effect from 1 January 1912.[7][8]

By 1912, both locomotives still survived to be taken onto the South African Railways roster. Since they were considered obsolete, the locomotives were designated Class 01 and renumbered by having the numeral 0 prefixed to their existing numbers. Even though they were considered obsolete and no. 0415 was scrapped in 1916, no. 0416 was only scrapped in 1946, after seventy years in service.[2][6][7][9]

Illustration

  • SAR Class 01 2-6-0ST no. 0416
    SAR Class 01 2-6-0ST no. 0416

References

Wikimedia Commons has media related to CGR 1st Class 2-6-0ST.
  1. ^ a b c d Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 28, 106. ISBN 978-0-7153-5382-0.
  2. ^ a b c d e C.G.R. Numbering Revised, Article by Dave Littley, SA Rail May–June 1993, pp. 94-95.
  3. ^ a b c Back-to-back - The known facts
  4. ^ Wiener, Lionel. Articulated Locomotives. pp. 508-509, 511.
  5. ^ a b c Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, September 1943. pp. 657-659.
  6. ^ a b Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. pp. 118–121. ISBN 978-0-7153-5427-8.
  7. ^ a b c d Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 2, 18. (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  8. ^ The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  9. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 16. ISBN 0869772112.
  • v
  • t
  • e
Locomotives of the Cape of Good Hope
7' ¼" gauge4' 8½" gauge3' 6" gauge
2' 6" gauge
  • Namaqua Copper Pioneer
  • Walvis Bay Hope
2' gauge
  • v
  • t
  • e
Steam
7' ¼" gauge
Standard gauge
  • CGR 0-4-0ST Aid
  • Natal 0-4-0ST Durban
  • Natal 0-4-0WT Natal
  • Natal 4-4-0T Perseverance
Cape gauge
Tank engines
  • Durban's Congella
  • Durban's Edward Innes
  • Durban's John Milne
  • Durban's Sir Albert
Cape gauge
Tender engines
Cape gauge
Articulated
engines
2' 6" gauge
  • Cape Copper John King & Miner
  • Cape Copper Britannia
  • Cape Copper Caledonia
  • Cape Copper Clara
  • Cape Copper Condenser
  • Cape Copper Scotia
  • Namaqua Copper Pioneer
  • Walvis Bay 2-4-2T Hope
2' & 600mm
gauges
Electric
Gas-electric
Diesel
Cape gauge
Diesel-electric
2' gauge
Diesel-electric
Cape gauge
Diesel-hydraulic
Cape gauge
Electro-diesel